Currently, there are synthetic, semi-synthetic “or” full synthetic “lubricant claims. Many people judge “synthetic” lubricants much better than semi-synthetic lubricants, especially when compared with ordinary lubricants aka mineral lubricants. Is it true? Not necessarily so. Not even all lubricants with “synthetic” claims have the same qualities. Assume the additive is identical though, the type and percentage of the synthetic base oil content of the lubricant will determine the final quality of the lubricant. To note, a lubricant consists of base oil (base oil) and additives. The difference between synthetic lubricants and mineral lubricants is on base oil. Mineral lubricants use mineral base oil that is processed from crude oil (crude oil) in oil processing plants. While technically, synthetic lubricants use synthetic base oil derived from the synthesis process of a substance to obtain a lubricant base material with a certain advantage when compared to base oil ex-processing of crude oil. For example, synthetic base type PAO or ester. When your vehicle has to change the oil, then you should immediately come to our place Sears Oil Change to get treatment for your car. No more asking How Much is Sears Oil Change? Because our oil prices are very affordable starting from $ 49.99 to $ 59.99.
American Petroleum Institute (API), one of the organizations that also make the standard lubricant, classifies base oil into 5 categories/groups. Base mineral oils are in the Group I to Group III categories, while Group IV and V base oils are referred to as synthetic base oils. However, due to the nature and processing of base oil Group III which makes the base oil very pure and very different from the original material (raw), then almost all lubricant manufacturers in the world now market lubricants with base oil Group III as synthetic lubricants. In addition to the mineral or synthetic classification of base oil used, another thing that also affects the quality of lubricants is the percentage. For example, if a synthetic base oil is used only 10% of the total base oil contained in a lubricant, it is technically not feasible to use a “synthetic” claim.